ftdi.conf: added
This commit is contained in:
parent
366432e4af
commit
d2c28febd7
133
tools/ftdi.conf
Normal file
133
tools/ftdi.conf
Normal file
@ -0,0 +1,133 @@
|
||||
#see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c
|
||||
#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h
|
||||
#and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom
|
||||
#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf
|
||||
#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c
|
||||
|
||||
############
|
||||
# Filename #
|
||||
############
|
||||
filename=eeprom.new # Filename of the EE file to be generated. Leave empty to skip file writing
|
||||
#flash_raw=false # Boolean:
|
||||
|
||||
## Include another config file?
|
||||
#include
|
||||
|
||||
############
|
||||
# IDs #
|
||||
############
|
||||
# Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
|
||||
|
||||
vendor_id="0x0403"
|
||||
product_id="0x6014"
|
||||
|
||||
##############################
|
||||
# Device and Serial Strings #
|
||||
##############################
|
||||
manufacturer="FTDI" # String: Manufacturer. FT245R factory default FTDI
|
||||
product="FT232H Single HS USB-UART/FIFO" # String: Product. FT245R factory default FT245R USB FIFO
|
||||
serial="00-00"
|
||||
use_serial=true
|
||||
|
||||
############
|
||||
# Options #
|
||||
############
|
||||
max_power=500 # Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90
|
||||
self_powered=false # Boolean: Turn this off for bus powered
|
||||
remote_wakeup=true # Boolean: Turn this on for remote wakeup feature
|
||||
|
||||
# Normally you don't have to change one of these flags
|
||||
#in_is_isochronous=false # Boolean: In Endpoint is Isochronous
|
||||
#out_is_isochronous=false # Boolean: Out Endpoint is Isochronous
|
||||
#suspend_pull_downs=false # Boolean: Enable suspend pull downs for lower power
|
||||
#change_usb_version=false # Boolean: Change USB Version
|
||||
#usb_version=0x00 # Integer: Only used when change_usb_version is enabled
|
||||
|
||||
#default_pid=0x6001 # Integer: Default Pid.
|
||||
|
||||
eeprom_type=6 # Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h
|
||||
#high_current=false # Boolean: High Current Drive
|
||||
|
||||
##Type_R chips
|
||||
# Only used on FT-R chips (when omitted, use chip defaults)
|
||||
# Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c
|
||||
# Values in the struct are (see current ftid.h for an up to date list):
|
||||
# CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 = 9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc
|
||||
# Strings to be used here are:
|
||||
# "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD"
|
||||
#cbus0=TXLED # String parsed to integer: FT245R factory default TXLED
|
||||
#cbus1=RXLED # String parsed to integer: FT245R factory default RXLED
|
||||
#cbus2=TXDEN # String parsed to integer: FT245R factory default TXDEN
|
||||
#cbus3=PWREN # String parsed to integer: FT245R factory default PWREN
|
||||
#cbus4=SLEEP # String parsed to integer: FT245R factory default SLEEP
|
||||
|
||||
## Only used on FT232H chips (when omitted, use chip defaults)
|
||||
# Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c.
|
||||
# Values are (see current ftid.h for an up to date list):
|
||||
# CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN = 9, CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12
|
||||
# Strings to be used in this config file are:
|
||||
# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5"
|
||||
##Type_232H Chips
|
||||
cbush0=TRISTATE # String parsed to integer:
|
||||
cbush1=TRISTATE # String parsed to integer:
|
||||
cbush2=TRISTATE # String parsed to integer:
|
||||
cbush3=TRISTATE # String parsed to integer:
|
||||
cbush4=TRISTATE # String parsed to integer:
|
||||
cbush5=TRISTATE # String parsed to integer:
|
||||
cbush6=TRISTATE # String parsed to integer:
|
||||
cbush7=TRISTATE # String parsed to integer:
|
||||
cbush8=TXLED # String parsed to integer:
|
||||
cbush9=RXLED # String parsed to integer:
|
||||
# Group Drive
|
||||
# Strings to be used in this config file are:
|
||||
# "4MA", "8MA", "12MA", "16MA"
|
||||
#group0_drive # Integer:
|
||||
|
||||
# Only used on FT230X chips (when omitted, use chip defaults)
|
||||
# Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c.
|
||||
# Values are (see current ftid.h for an up to date list):
|
||||
# CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN = 9, CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21
|
||||
# Strings to be used in this config file are:
|
||||
# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE"
|
||||
#cbusx0=TXDEN # String parsed to integer:
|
||||
#cbusx1=RXLED # String parsed to integer:
|
||||
#cbusx2=TXLED # String parsed to integer:
|
||||
#cbusx3=SLEEP # String parsed to integer:
|
||||
|
||||
########
|
||||
# Misc #
|
||||
########
|
||||
|
||||
## Pin Configuration
|
||||
#invert_txd # Boolean: Invert TXD signal
|
||||
#invert_rxd # Boolean: Invert RXD signal
|
||||
#invert_rts # Boolean: Invert RTS signal
|
||||
#invert_cts # Boolean: Invert CTS signal
|
||||
#invert_dtr # Boolean: Invert DTR signal
|
||||
#invert_dsr # Boolean: Invert DSR signal
|
||||
#invert_dcd # Boolean: Invert DCD signal
|
||||
#invert_ri # Boolean: Invert RI signal
|
||||
|
||||
## Channel Types and Drivers
|
||||
# Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c.
|
||||
# (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10
|
||||
# (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3
|
||||
# Strings to be used in this config file are:
|
||||
# "UART", "FIFO", "OPTO", "CPU", "FT1284"
|
||||
cha_type=CPU
|
||||
# String parsed to integer:
|
||||
#chb_type
|
||||
# String parsed to integer:
|
||||
|
||||
#cha_vcp=false # Boolean:
|
||||
#chb_vcp=false # Boolean:
|
||||
#chc_vcp=false # Boolean:
|
||||
#chd_vcp=false # Boolean:
|
||||
#cha_rs485 # Boolean:
|
||||
#chb_rs485 # Boolean:
|
||||
#chc_rs485 # Boolean:
|
||||
#chd_rs485 # Boolean:
|
||||
|
||||
## Include user defined binary data into the the eeprom at address?
|
||||
#user_data_addr # Integer:
|
||||
#user_data_file # String: Filename of the data file to be used
|
||||
Loading…
x
Reference in New Issue
Block a user